Abit BP6 User Manual download pdf (Page 36)

3-6 Chapter3

BP6

Solution in case of booting problem due to invalid clock setup:

Normally, if the CPU clock setup is wrong, you will not be able to boot. In this case, turn the

system off then on again. The CPU will automatically use its standard parameters to boot.

You can then enter the BIOS Setup again and set up the CPU clock. If you can’t enter the

BIOS setup, you must try turning the system on a few times (3~4 times) or press

“INSERT“ key when turning on and the system will automatically use its standard

parameters to boot. You can then enter BIOS SETUP again and set up the new parameters.

When you change your CPU:

This motherboard has been designed in such a way that you can turn the system on after

having inserted a CPU in the socket without having to configure any jumpers or DIP

switches. But if you change your CPU, normally you just have to turn off the power supply,

change the CPU and then, set up the CPU parameters through

SOFT MENU

™

. However,

if the new CPU is slower than the old one (and is same brand and type), we offer you two

methods to successfully complete the CPU change operation.

Method 1: Setup up the CPU for the lowest speed of its kind. Turn the power supply off and

change the CPU. Then turn the system on again, and set up the CPU parameters

through

SOFT MENU

™

Method 2: Since you have to open the computer case when you change the CPU, it could be

a good idea to use the CCMOS jumper to erase the parameters of the original

CPU and to enter BIOS Setup to set up CPU parameters again.

Attention

After setting up the parameters and leaving the BIOS SETUP, and having verified that

the system can be booted, do not press the Reset button or turn off the power supply.

Otherwise the BIOS will not read correctly, the parameters will fail and you must enter

SOFT MENU

™

again to set up the parameters all over again.

CPU Power Supply:

This option allows you to switch between CPU default and user defined voltages.

➤

➤➤

➤

CPU Default:

The system will detect the CPU type and select the proper voltage

automatically. When it is enabled, the option “

Core Voltage

” will show

the current voltage setting that is defined by the CPU and this will not be

changeable. We recommend using this CPU default setting and not

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 97 98

Comments to this Manuals

No comments

Abit BP6 User Manual Page 36

Comments to this Manuals

Related products and manuals for Motherboards Abit BP6