Abit BP6 User Manual download pdf (Page 58)

3-28 Chapter3

BP6

3-6. PNP/PCI Configuration

In this menu, you can change the INT# and IRQ of the PCI bus and other hardware settings.

Figure 3-7. PNP/PCI Configuration Menu

PNP OS Installed:

Device resource assigned by PnP OS or BIOS.

Force Update ESCD:

If you want to clear ESCD data next time you boot up, and ask the BIOS to reset the settings

for the Plug & Play ISA Card and the PCI Card, select Enabled. But the next time you boot

up, this option will automatically be set as Disabled.

Computer Knowledge: ESCD (Extended System Configuration Data)

The ESCD contains the IRQ, DMA, I/O port, memory information of the system. This

is a specification and a feature specific to the Plug & Play BIOS.

Resources Controlled By:

When resources are controlled manually, assign each system interrupt as one of the

following types, depending on the type of device using the interrupt:

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 97 98

No comments

Abit BP6 User Manual Page 58