Abit BP6 User Manual download pdf (Page 71)

BIOS Flashing User Instructions A-3

User’s Manual

Note A-1

The BIOS file name in the figure shown to you is only an example, you should check

which .bin file is to be used with your motherboard, don’t flash with the wrong .bin file.

Otherwise, you may cause system malfunctions. Even the same models BIOS,

according its release date and according to which problems are fixed, also have

different .bin names. Please read the BIOS file description before you download it.

Example 1: To update the BIOS and create a backup of the current system BIOS execute

this command:

AWDFLASH NEWBIOS /PY SAVEBIOS /SY

Example 2: To update the BIOS, create a backup of current system BIOS, and clear the

CMOS, execute this command:

AWDFLASH NEWBIOS SAVEBIOS /CC

Example 3: To update the BIOS and clear PnP settings execute this command:

AWDFLASH NEWBIOS /SN /CP

Example 4: To make a backup of the current system BIOS execute the following command:

AWDFLASH NEWBIOS /PN SAVEBIOS

Notes A-2

“NEWBIOS” indicates the file name for the new BIOS which can be downloaded from

our web site at http://www.abit.com.tw (the user can choose a different file name in

place of NEWBIOS). “SAVEBIOS” indicates the filename of the old system BIOS (the

user can choose a different file name in place of SAVEBIOS).

Explanation of parameter names:

/CC: Clears CMOS data

/CP: Clears PnP data

/CD: Clears DMI data

Remarks:

1. When executing AWDFLASH.EXE, do not run HIMEM.SYS and EMM386.EXE in the

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 97 98

No comments

Abit BP6 User Manual Page 71