Abit BP6 User Manual download pdf (Page 34)

3-4 Chapter3

BP6

User defined external clock and multiplier factor:

➤

➤➤

➤

User Defined

$$$$

$$$$$$$$

$$$$

Warning

$$$$

$$$$$$$$

$$$$

The wrong settings of the multiplier and external clock in certain circumstances may

cause CPU damage. Setting the working frequency higher than the PCI chipset or

processor specs, may cause abnormal memory module functioning, system hangs, hard

disk drive data lose, abnormal functioning of the VGA card, or abnormal functioning

with other add-on cards. Using non-specification settings for your CPU is not the

intention of this explanation. These should be used for engineering testing, not for

normal applications.

If you use non-specification settings for normal operation, your system may not be

stable, and may effect system reliability. Also, we do not guarantee the stability and

compatibility for settings that are not within specification, and any damage of any

elements on the motherboard or peripherals, is not our responsibility.

✏

Turbo Frequency:

This item will only be displayed if your CPU external clock supports Turbo Mode.

The Turbo mode allows you to speed up the external clock by approximately 2.5%.

This feature is used to verify the design flexibility. It is a very important tool for test

units to verify CPU stability. Do not use this feature.

➤

Disabled: CPU external clock is operating within the normal limits.

➤

Enabled: CPU external clock is operating within the limits of the Turbo mode.

Note

The increase by 2.5% of the CPU speed is not a standard feature of this product. It is

only for use by our development department to verify that the CPU is able to work

normally when CPU speed, operating temperature and power supply are 2.5% higher or

lower than the standard values. This is to guarantee product stability. We require the

manufacturer of the Clock Generator to meet the demands of our development

department and to add a TURBO Frequency feature used for testing purposes by our

R&D department. Of course, you can use this feature to test the stability of your own

system, but after you have tested the product, we recommend that you set it back to its

normal value in order to guarantee system stability.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 97 98

Comments to this Manuals

No comments

Abit BP6 User Manual Page 34

Comments to this Manuals

Related products and manuals for Motherboards Abit BP6