Abit BP6 User Manual download pdf (Page 21)

Installing the Motherboard 2-9

User’s Manual

WOL: Wake on LAN Header

If you have a Network adapter that supports

this feature, then you can connect the

specific cable from the network adapter to

this header.

This feature lets you wake up

your computer via remote control through a

local area network. You may need a specific

utility to control the wake up event, like

using the Intel

®

LDCM

®

utility or other

similar utilities.

Note: Watch the pin position and the

orientation

SMBCON: System Management Bus Connector

This connector is reserved for system

management bus (SMBus). The SMBus is a

specific implementation of an I

2

C bus. I

2

C is

a multi-master bus, which means that

multiple chips can be connected to the same

bus and each one can act as a master by

initiating a data transfer. If more than one

master simultaneously tries to control the

bus, an arbitration procedure decides which

master gets priority.

Note: Watch the pin position and the orientation

CCMOS: CMOS Discharge Jumper

Jumper CCMOS discharge CMOS memory.

When you install the motherboard, make

sure this jumper is set for normal operation

(pin 1 and 2 shorted). See figure 2-8.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 97 98

Comments to this Manuals

No comments