Abit BP6 User Manual download pdf (Page 23)

Installing the Motherboard 2-11

User’s Manual

PN1 (Pin 1-2): Hardware Reset Switch Header

Attach the cable from the case’s front panel

Reset switch to this header. Press and hold

the reset button for at least one second to

reset the system.

PN1 (Pin 4-5-6-7): Speaker Header

Attach the cable from the system speaker to

this header.

PN1 (Pin 9-10): Suspend LED Header

Insert the two-threaded suspend LED cable

into pin 9 and pin 10. If you install it in the

wrong direction, the LED light will not

illuminate correctly.

PN2 (Pin 1-2-3-4-5): Power LED and Keylock Switch Headers

There is a specific orientation for pins 1

through 3. Insert the three-threaded power

LED cable to pins 1~3, and the two-threaded

keylock cable into pin 4 and pin 5. Check to

make sure the correct pins go to the correct

connectors on the motherboard. If you

install them with the wrong direction, the power LED light will not illuminate correctly.

Note: Watch the power LED pin position and orientation.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 97 98

No comments

Abit BP6 User Manual Page 23