Abit NV8 User Manual download pdf (Page 42)

3-16 Chapter 3

3-6. Power Management Setup

Phoenix – AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Suspend Type S3(Suspend-to-RAM) Item Help

- USB Resume from S3 Disabled

Power Button Function Instant-Off

Wake-Up by PME# of PCI Disabled

Wake-Up by Ring Disabled

Wake-Up by OnChip LAN Enabled

Wake-Up by Alarm Disabled

X - Date(of Month) Alarm 0

X - Time (hh:mm:ss) Alarm 0 : 0 : 0

POWER ON Function BUTTON ONLY

X - KB Power ON Password Enter

X - Hot Key Power ON Ctrl-F1

Restore on AC Power Loss Power Off

↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

ACPI Suspend Type:

This item selects the type of Suspend mode.

[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.

[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.

! USB Resume from S3:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,

any event related to onchip USB will power on the system. This item can be configured only if the item

“ACPI Suspend Type” is set to [S3(STR)].

Power Button Function:

Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off. It is activated

when the user presses the power button for more than four seconds while the system is in the working

state, then the system will transition to the soft-off (Power off by software). This is called the power

button over-ride.

Wakeup by PME# of PCI:

Two options are available: Disabled or Enabled. The default setting is Enabled. When set to Enabled, any

event related to PCI cards (PME) will power on the system.

Wake-Up by Ring:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,

any event affecting from Modem Ring will awaken a system that has powered down.

NV8

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 71 72

No comments

Abit NV8 User Manual Page 42