Abit NV8 User Manual download pdf (Page 41)

BIOS Setup 3-15

OnChip Audio Controller:

This option enables or disables the audio controller.

OnChip LAN Controller:

This option enables or disables the LAN controller.

! Onboard LAN Boot ROM:

This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the

local area network directly.

Onboard FDC Controller:

Two options are available: Enabled and Disabled. The default setting is Enabled. You can enable or

disable the onboard FDC controller.

Onboard Serial Port 1:

This is used to specify the I/O address and IRQ of Serial Port 1. Six options are available: Disabled $

3F8/IRQ4 $ 2F8/IRQ3 $ 3E8/IRQ4 $ 2E8/IRQ3 $ AUTO. The default setting is 3F8/IRQ4.

Onboard Parallel Port:

Sets the I/O address and IRQ of the onboard parallel port. Four options are available: Disabled $

378/IRQ7 $ 278/IRQ5 $ 3BC/IRQ7. Default setting is 378/IRQ7.

Parallel Port Mode:

Four options are available: SPP $ EPP $ ECP $ ECP+EPP. The default setting is SPP mode.

! EPP Mode Select:

Two options are available: EPP1.7 $ EPP1.9. The default setting is EPP 1.7 When the mode selected for

the parallel port mode is EPP, the two EPP version options are available.

! ECP Mode Use DMA:

Two options are available: 1 $ 3. The default setting is 3. When the mode selected for the parallel port

mode is ECP, the DMA channel selected can be Channel 1 or Channel 3.

IDE HDD Block Mode:

This item enables or disables the IDE HDD Block Mode.

User’s Manual

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 71 72

No comments

Abit NV8 User Manual Page 41