Abit NV8 User Manual download pdf (Page 39)

BIOS Setup 3-13

# IDE Function Setup:

Click <Enter> key to enter its submenu:

Phoenix – AwardBIOS CMOS Setup Utility

IDE Fuction Setup

OnChip IDE Channel 1 Enabled Item Help

OnChip IDE Channel 2 Enabled

IDE DMA transfer access Enabled

Serial-ATA 1/2 Enabled

Serial-ATA 3/4 Enabled

IDE Prefetch Mode Enabled

↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

OnChip IDE Channel 1/ OnChip IDE Channel 2:

This item allows you to enable or disable the primary (IDE1) and secondary (IDE2) IDE controller. Select

[Disabled] if you want to add a different hard drive controller.

IDE DMA transfer access:

This item selects the DMA mode for devices connected through IDE channels.

Serial-ATA 1/2, Serial ATA 3/4:

This item enables or disables the on-chip SATA controller.

IDE Prefetch Mode:

Two options are available: Disabled or Enabled. The default setting is Enabled. The onboard IDE drive

interfaces support IDE prefetching for faster drive accesses. If you install a primary and/or secondary

add-in IDE interface, set this field to Disabled if the interface does not support prefetching.

User’s Manual

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

No comments

Abit NV8 User Manual Page 39