Abit NV8 User Manual download pdf (Page 10)

2-2 Chapter 2

2-2. Install CPU, Heatsink and Fan Assembly

Please pay attention to the following notices

before installing the CPU and heatsink/fan

assembly.

1. Always use the processor with the

Heatsink and Fan Assembly installed.

2. Do not touch the pins on the processor.

3. If you ever need to reinstall the Heatsink

and fan Assembly, please clean the

heatsink surface and apply new thermal

interface material first.

1. Pull out the socket locking lever slightly,

then lift it up.

2. Align the corner with triangle mark of the

processor with the marking on the motherboard,

and then place the processor vertical down into

the socket.

3. Lower the locking lever to the fully locked

position.

4. Apply thermal interface material.

5. Place the heatsink and fan assembly onto

the retention frame. Match the heatsink clip

with the socket mounting lug. Hook the spring

clip to the mounting lug.

NV8

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

Comments to this Manuals

No comments