Abit IP35 PRO XE User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
2-2 IP35 Pro
2.1 μGuru
Utility
There are two setup menus in this μGuru utility. You may switch between these two by clicking
the left or right arrow key on keyboard:
2.1.1 OC Guru
μGuru Utility v1.01C
OC Guru
Genuine Intel(R) CPU 3.60GHz Item Help
Frequency : 3672MHz
CPU Operating Speed 3600(200)
X - External Clock 204MHz
X - Multiplier Factor X 18
X - Estimated New CPU Clock 3672MHz
X - DRAM Speed (CPU:DRAM) Default
X - PCI Express Clock 100MHz
Voltages Control Press Enter
Power Cycle Statistics Press Enter
:Move Enter:Select +/-/PU/PD:Value F8:OC On The Fly F10:Save ESC:Exit
Genuine Intel(R) CPU
This item displays the CPU model name installed on this motherboard.
Frequency
This item displays the processor speed of the CPU installed on this motherboard.
CPU Operating Speed
This item displays the CPU operating speed according to the type and speed of your CPU. You
can also select the [User Define] option to enter the manual option.
User Define:
The wrong settings of the multiplier and external clock in certain
circumstances may cause CPU damage. Setting the working frequency higher
than the PCI chipset or processor specs, may cause abnormal memory module
functioning, system hangs, hard disk drive data lose, abnormal functioning of
the VGA card, or abnormal functioning with other add-on cards. Using
non-specification settings for your CPU is not the intention of this explanation.
These should be used for engineering testing, not for normal applications.
There will be no guaranty for the settings beyond specification. Any damage of
any component on this motherboard or peripherals resulting therein is not our
responsibility.
- External Clock
This item selects the external clock frequency. Due to the specification limit of the CPU you
installed, the speed you set over its standard bus speed is supported, but not guaranteed.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 87 88

Comments to this Manuals

No comments