Abit IP35 PRO XE User Manual download pdf (Page 49)

BIOS Setup

IP35 Pro 2-23

[Power On]: When power returns after an AC power failure, the system’s power will be

powered on automatically.

[Last State]: When power returns after an AC power failure, the system will return to the

state where you left off before power failure occurred. If the system’s power is off when AC

power failure occurs, it will remain off when power returns. If the system’s power is on when

AC power failure occurs, the system will power-on when power returns.

2.7 PnP/PCI Configurations

Phoenix – AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

Resources Controlled By Auto Item Help

X - IRQ Resources Press Enter

PCI/VGA Palette Snoop Disabled

** PCI Express relative items **



:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Resources Controlled By

This item configures all of the boot and Plug-and-Play compatible devices.

[Auto]: The system will automatically detect the settings.

[Manual]: Choose the specific IRQ resources in the “IRQ Resources” menu.

- IRQ Resources

Click <Enter> key to enter its submenu:

This item sets each system interrupt to either [PCI Device] or [Reserved].

PCI/VGA Palette Snoop

This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.

[Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA.

[Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 87 88

No comments

Abit IP35 PRO XE User Manual Page 49