Abit IP35 PRO XE User Manual download pdf (Page 48)

2-22 IP35 Pro

Resume by Alarm

When set to [Enabled], you can set the date and time you would like the Soft-Off PC to

power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” items. However,

if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to

the date and time set in these items, the system will give priority to the incoming calls or

network instead.

- Date (of Month) Alarm

[0]: This option power-on the system everyday according to the time set in the “Time

(hh:mm:ss) Alarm” item.

[1-31]: This option selects a date you would like the system to power-on. The system will

power-on on the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.

- Time (hh:mm:ss) Alarm

This item sets the time you would like the system to power-on.

POWER ON Function

This item selects the way you want your system to power on.

[Password]: Use a password to power on the system, select this option then press <Enter>.

Enter your password. You can enter up to 5 characters. Type in exactly the same password to

confirm, and then press <Enter>.

[Hot KEY]: Use any of the function keys between <F1> to <F12> to power on the system.

[Mouse Left]: Double click the mouse left button to power on the system.

[Mouse Right]: Double click the mouse right button to power on the system.

[Any KEY]: Use any keyboard keys to power on the system.

[Button Only]: Use only the power button to power on the system.

[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to power

on the system.

※ The mouse wake up function can only be used with the PS/2 mouse, not with

the COM port or USB type. Some PS/2 mice cannot wake up the system

because of compatible problems. If the specs of your keyboard are too old, it

may fail to power on.

- KB Power ON Password

This item sets the password required in order to power on your computer.

※ Do not forget your password, or you will have to clear the CMOS and reset all

parameters in order to utilize this function again.

- Hot Key Power ON

This item powers on the system by pressing <Ctrl> key plus one of each function key (<F1> ~

<F12>) simultaneously.

Restore On AC Power Loss

This item selects the system action after an AC power failure.

[Power Off]: When power returns after an AC power failure, the system’s power remains off.

You must press the Power button to power-on the system.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 87 88

No comments

Abit IP35 PRO XE User Manual Page 48