Abit IP35 PRO XE User Manual download pdf (Page 41)

BIOS Setup

IP35 Pro 2-15

Boot Up Floppy Seek

When set to [Enabled], the BIOS will check whether the floppy disk drive is installed or not.

Boot Up NumLock Status

This item determines the default state of the numeric keypad at system booting up.

[On]: The numeric keypad functions as number keys.

[Off]: The numeric keypad functions as arrow keys.

Security Option

This item determines when the system will prompt for password - every time the system boots

or only when enters the BIOS setup.

[Setup]: The password is required only when accessing the BIOS Setup.

[System]: The password is required each time the computer boots up.

※ Don’t forget your password. If you forget the password, you will have to open

the computer case and clear all information in the CMOS before you can start

up the system. But by doing this, you will have to reset all previously set

options.

MPS Version Ctrl For OS

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will

use. Leave this item at its default setting.

Report No FDD For OS

When set to [Yes], this item allows you to run some older operating system without floppy disk

drive. Leave this item at its default setting.

Full Screen LOGO Show

This item determines to show the full screen logo when booting.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 87 88

No comments

Abit IP35 PRO XE User Manual Page 41