Abit FX5600 OTES User Manual download pdf (Page 37)

So decreasing steering exponential reduces the sensitivity around neutral. Increasing exponential increases the

sensitivity and is hardly used.

You can set the amount of exponential steering you would like to have; this is useful for USB controllers that

cannot be adjusted. For a start you can use -20.

The steering exponential can also be set while driving on the track using E + and E – keys without leaving the

track. During adjustment the value is displayed in the left bottom corner of the game.

Reverse throttle:

If the throttle and brake are reversed on your controller you can put them right by clicking Reverse throttle to

ON.

Throttle exponential:

This works the same as for the steering exponential. If you want less sensitivity around neutral then decrease

the exponential setting.

The throttle exponential can also be set while driving using Ctrl E + and Ctrl E - keys. During adjustment the

value is displayed in the left bottom corner of the game.

Note:

If you are using a more advanced transmitter with programmable functions you can also set exponential

steering and throttle, dual rate, steering and brake trim etc. on your transmitter. Everything you change on

your transmitter will affect the steering and throttle settings in VRC Pro.

Customize

Use the customize button to configure a joystick, a USB game pad suitable for Windows (also Xbox 360) and

even your keyboard. If you have a USB device like the VRC USB pistol or stick controller you can use it to make

fine adjustments.

You can ‘map’ the steering and throttle/brake inputs, adjust the dead zone and set the throw (saturation).

Specific PS3 gamepads require a special driver to be recognized by Windows. Check www.motioninjoy.com

and http://www.hardcoreware.net/how-to-playstation-3-controller-64-bit-windows-7-vista/ how to use it for

Windows 7. Most Xbox gamepads can be used for Windows 7 as well.

Choose controller

Select the controller or keyboard that you like to customize and select ‘Customize’.

Customize input

Here you map or assign the controller input to the steering, throttle or braking function.

Steering left

Move the selected controller device stick, trigger or wheel which you want to use to steer left.

For keyboard mapping press the key you want to use for steering to the left, for example 

Steering right

Move the selected controller device stick, trigger or wheel which you want to use to steer right.

For keyboard mapping press the key you want to use for steering to the right, for example 

Accelerate

Move the selected controller device stick or wheel which you want to use to accelerate.

For keyboard mapping press the key you want to use for steering to the right, for example A

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 75 76

No comments

Abit FX5600 OTES User Manual Page 37