Abit Socket 462 System Board User's Guide download pdf (Page 39)

ASUS A7V333 motherboard user guide

A7V333

A7V333 Speaker Selector

SPEECH

BACK PANELBUZZER

(Default)

A7V333

A7V333 Bass Center Setting

TYPE 1 BASS

BCS2

BCS1

BCS2

BCS1

(Default)

TYPE 2 BASS

13) Bass Center Setting (2x3 pin CENTER/BASS, BASS/CENTER)

Use these jumpers in conjunction with the C-Media PCI Audio Driver and to

adjust output for 4 or 6 speaker audio. No audio standard exists for the three

pick-up surfaces on male audio jacks, therefore it may be necessary to switch

jumpers from the default position, type 1, to type 2, in order to reroute signals

among the internal leads in the Line-In, Line-Out, Mic female sockets. Make

sure a test is made using the Audio Driver software setup available on the

Support CD.

14) Speaker Selector (3 pin SPEECH)

This jumper specifies which speaker to use for the ASUS POST Reporter

function. The default setting to pins [2-3] feeds an external speaker to the

Line-out jack (lime color). Set to pins [1-2] to use the internal buzzer (usually

included in the chassis).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 139 140

No comments

Abit Socket 462 System Board User's Guide Page 39