Abit IS7-E User Manual download pdf (Page 34)

SuperDVR & TD Series Cards

(6) Video Loss State

When the indicator light color turns into

in row two, it means there

is alarm output.

Manual Record Mode

Manual Record mode is the most commonly used record mode. In case

there is any special event happens, users can select this record mode and

record timely.

Note: You can select high frame rate for short time manual record,

while select low frame rate for long time Schedule Record.

Sensor Alarm Record Mode

Users can use sensors to trigger sensor alarm record for relative

channels. At that time, the record status indicator light will turn red .

Motion Detection Record Mode

It will enable the system to detect image changes and begin to record by

activating motion detection and motion alarm record. For instance, somebody

opens the door, and the system detects image changes and begins to record,

then users can play back the recorded file and find out who opened door.

When there is no movement, the system won’t record and that’s helpful for

saving system resource, and convenient for searching for event record file.

The indicator light color in the record status panel is yellow

Note: Users may need to setup in three places so as to enable motion

detection record.

(1) Select ‘Motion Detection’ for certain channels in ‘Basic Configuration’

(2) Configure the motion detection areas for certain channels in ‘Motion

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 110 111

No comments

Abit IS7-E User Manual Page 34