Abit AW9D-MAX User Manual download pdf (Page 53)

BIOS Setup

AW9D-MAX, AW9D 3-17

※ Don’t forget your password. If you forget the password, you will have to open

the computer case and clear all information in the CMOS before you can start up

the system. But by doing this, you will have to reset all previously set options.

MPS Version Ctrl For OS

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will

use. Leave this item at its default setting.

Report No FDD For OS

When set to [Yes], this item allows you to run some older operating system without floppy disk

drive. Leave this item at its default setting.

Delay IDE Initial (Secs)

This item allows the BIOS to support some old or special IDE devices by prolonging this delay

time. A larger value will give more delay time to the device for which to initialize and to prepare

for activation.

Full Screen LOGO Show

This item determines to show the full screen logo when booting.

Disable Unused PCI Clock

This option disables the clock of PCI slot that is not in use.

[Yes]: The system automatically detect the unused DIMM and PCI slots, and stop sending

clock signal to these unused PCI slots.

[No]: The system always send clock signal to all PCI slots.

※ Set this option to [No] setting if there are adapters that cannot be automatically

detected by the system and will cause malfunction.

1 ... 52 53 54 ... 88

No comments

Abit AW9D-MAX User Manual Page 53