Abit GURU CLOCK User Manual Page 73

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 72
BIOS Setup 3-23
3-6. Power Management Setup
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type S3(Suspend-to-RAM Item Help
- USB Resume from S3 Enabled
Power Button Function Instant-Off
Wake-Up by PME# of PCI Enabled
Wake-Up by OnChip LAN Enabled
Wake-Up by Alarm Disabled
X - Date(of Month) Alarm 0
X - Time (hh:mm:ss) Alarm 0 : 0 : 0
Cool’n’Quiet Technology Disabled
POWER ON Function BUTTON ONLY
X - KB Power ON Password Enter
X - Hot Key Power ON Ctrl-F1
Restore on AC Power Loss Power Off
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
! USB Resume from S3:
Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,
any event related to onchip USB will power on the system. This item can be configured only if the item
“ACPI Suspend Type” is set to [S3(STR)].
Power Button Function:
Two options are available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off. It is activated
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
Wakeup by PME# of PCI:
Two options are available: Disabled or Enabled. The default setting is Enabled. When set to Enabled, any
event related to PCI cards (PME) will power on the system.
Wake-Up by OnChip LAN:
When set to [Enabled], you can remotely wake up a PC in Soft-Off condition via a LAN card that support
the wake up function.
Wake-Up by Alarm:
Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,
you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend
User’s Manual
Page view 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 103 104

Comments to this Manuals

No comments