Abit AX5 Specifications download pdf (Page 75)

Quick Installation

A-1

Appendix A Quick Installation

Appendix A will give you a simplified installation procedure, in order to

allow you to install tour mainboard quickly and correctly.

If you need further information or if you need to change some other settings,

read from Chapters 1.

Lift up the lever of the CPU socket, insert your

CPU on the socket, and lower the lever back in position. Don’t worry, if you

don’t respect the correct orientation, you will not be able to insert the CPU.

According to your CPU voltage

and speed, set up the CPU in the CPU SOFT MENU™ of the BIOS SETUP.

For information about your CPU, refer to appendices B, C or D, and to

information labeled on the CPU itself.

SIMM1 ~ SIMM4, DIMM1 ~ DIMM3 (AX5)

SIMM1 ~ SIMM2, DIMM1 ~ DIMM2 (PX5)

SIMM1 ~ SIMM4, DIMM1 ~ DIMM2 (TX5)

Since Pentium are 64-bit CPUs, you have to use two 72-pin DRAM modules, or

one 168-pin DRAM module.

FDC- Connect one end of the 34-pin cable that comes

with the drive to the FDD connector, and the other end of the cable to the FDC

pin connector on the mainboard.

Note: Be sure that the red line on the cable connects to the first pin of the

connectors.

Installing the CPU:

Adjusting CPU voltage and speed:

Installing DRAM:

Installing FDD:

1 ... 74 75 76 ... 119

No comments

Abit AX5 Specifications Page 75